Table of Contents
Advertisement
Advanced operation
Hibernate will be automatically disabled on your display when enabling the KVM switch
switch", page
To enable/disable hibernate
1.
Bring up the OSD main menu.
2.
Navigate to the Configuration > Power Management menu.
3.
Enter the Hibernate submenu.
4.
Select Enabled/Disabled as desired and confirm.
To adjust the hibernate time-out
1.
Bring up the OSD main menu.
2.
Navigate to the Configuration > Power Management menu.
3.
Enter the Hibernate Timeout submenu.
4.
Set the time-out value as desired and confirm.
4.9 Luminance target
About the luminance target
The luminance target of your Nio Fusion 12MP is adjustable over a predefined range. When you change the
luminance target, the display will adjust its backlight to reach the target.
To set the luminance target:
1.
Bring up the OSD main menu.
2.
Navigate to the Configuration > Calibration menu.
3.
Enter the Luminance Target submenu.
4.
Set a luminance target value as desired and confirm.
The default, factory calibrated luminance value is available in the technical specifications table. The
guaranteed backlight lifetime is valid for this setting.
4.10 Color presets
About color presets
The available color preset settings for your display are:
•
Clearbase: Simulation of the clearbase film color temperature
•
Bluebase: Simulation of the bluebase film color temperature
•
User: When selecting the User color preset, you will be able to manually define:
-
Color temperature (Kelvin)
-
Color coordinates (x, y)
•
6500K: Corresponds to a color temperature of 6500 Kelvin (D65)
•
Native White: The native, unmodified color temperature of the LCD panel
To select a color preset:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Calibration > Color Settings menu.
3. Enter the Color Presets submenu.
30
R5913350 /05
Nio Fusion 12MP
37).
(see"KVM
Advertisement
Table of Contents
