Removing The Countershaft And The Crankshaft - Beta RR 4T-400 Workshop Manual

Removing the countershaft and the crankshaft

– Turn the crankshaft until the marks on the countershaft and
the crankshaft are aligned.
– In this position the crankshaft can be removed from its seat.
– Remove the crankshaft.
– Clean all the parts, check them for wear and replace as nec-
essary.
NOTE: When the engine is overhauled, it is advisable to
replace all gaskets, oil seals, O-rings and bearings.
6 - Engine
Release 01 Date 09/2007
25