Beta RR 4T-400 Workshop Manual page 3

INTRODUCTION
This publication has been designed to assist authorized
service personnel of Betamotor Workshops in maintaining
and repairing the vehicle referred to in the manual. Famil-
iarity with the specifications contained herein is a key fac-
tor in the technical training of operators. In order to make
the manual easy to read and understand, the different
paragraphs are marked with icons that point out the subject
dealt with.
USEFUL ADVICE
To avoid problems and ensure best results, Betamotor
recommends observing the following guidelines:
- Whenever a repair is needed, analyse the customer's ac-
count of the malfunction and ask any questions that can
help to clarify the symptoms.
- Clearly diagnose the causes of the malfunction. This
manual provides basic operating principles which the op-
erator will have to supplement with their personal experi-
ence.
- Carefully plan the repair so as to avoid wasting time in
obtaining spare parts, preparing tools, etc.
- Gain access to the parts to be repaired by performing on-
ly the operations that are strictly necessary. For best re-
sults, always follow the removal procedures described in
this manual.
Note
Betamotor is committed to constantly improving its prod-
ucts. For this reason, there can be slight differences be-
tween the content of this manual and the vehicle to be re-
paired or serviced. Betamotor products are exported to
many countries characterized by different Highway Codes
and type-approval procedures. In view of this, Betamotor
reserves the right to modify its products and technical doc-
umentation at any time and without notice.
Let us help protect the environment
Everything we do affects the entire planet and its re-
sources.
To protect the common interest, Betamotor urges its cus-
tomers and service operators to use the vehicles and dis-
pose of their components in compliance with applicable
regulations on environmental pollution control, waste dis-
posal and recycling.
3