Beta RR 4T-400 Workshop Manual page 43

CONTROLS (RR4t USA)
Starter button
Starte button 3 is located on the right-hand side of the handle-
bars and operate the electri engine starter. Push the button un-
til the engine sterts.
Do not press the button 3 while the engine is running.
LH switch
Switch 11 is used to stop the engine. Press the button until the
12
engine stops.
While button 12 turns on the lights.
11
CONTROLS RS4T USA
RH switch
14
Starte button 13 is located on the right-hand side of the handle-
bars and operate the electri engine starter. Push the button un-
til the engine sterts.
Do not press the button 13 while the engine is running.
While button 14 turns off the engine.
Caution:
Before turning it on, make sure the switch 14 is on ON.
13
LH switch
Dip switch 4 has three positions:
ON OFF
lights off
low beam on
high beam on
Button 5 operates the horn.
Switch 6 is used to stop the engine.
Press the button until the engine stops.
13
4 - Maintenance
Release 01 Date 09/2007