Fluke 8508A User Manual page 116

8508A
Users Manual
Nrf
A number which, when rounded to an integer and expressed in base 2 (binary), enables
the appropriate bits in this register. The detail definition is contained in the IEEE 488.2
document and in the status data structure diagram.
Recall Service Request Enable
*SRE?
(Nr1) Recalls the enable mask for the standard defined event register. The returned value,
when converted to base 2 (binary), identifies the enabled bits which will generate a
service request. The detail is contained in the IEEE 488.2 document and in the status
data structure diagram.
Read Event Status Register
ESR?
(Nr1) The value returned, when converted to base 2 (binary), identifies the bits as defined
in the IEEE 488.2 standard and detailed in the status data structure diagram.
Power On and Reset Conditions
The Power On condition depends on the condition stored by the common *PSC
command - if 0 then it is not cleared; if 1 then the register is cleared. Reset has no effect.
Event Status Enable
ESE
Enables the standard defined event bits which will generate a summary message in the
status byte.
Nrf
A number which, when rounded to an integer and expressed in base 2 (binary), enables
the appropriate bits in this event register. The detail definition is contained in the IEEE
488.2 document, and in the status data structure diagram.
Recall Event Status Enable
4-42
*
SRE?
Recall Service Request Enable
* ESR?
Read Event Status Register
*
ESE phs
Event Status Enable
* ESE?
Recall Event Status Enable
Nrf
adj263f.eps
adj259f.eps
adj260f.eps
adj261f.eps