Web Printer Function Selection - TEC SX4T - B B/W Direct Thermal User Manual

5. SYSTEM MODE
NOTE: ACK/BUSY Signal Timing Chart
If the error occurs with the Centronics interface communication, change the types.

5.4.19 Web Printer Function Selection

With this parameter you can select whether or not the B-SX series printer can be used as a web
printer. When "<2>PARAMETER SET" appears, press the [PAUSE] key and the [FEED] key 18
times.
Press the [PAUSE] key to start. Use the [FEED] or [RESTART] key to select a desired option.
[RESTART]
[FEED]
After selecting the Web printer function, press the [PAUSE] key.
NOTE: When "WEB PRINTER ON" is selected, the status of the B-SX series printer connected
in a network can be checked through the Web browser.
Unavailable
Available
5-29
EO18-33012A
5.4 PARAMETER SETTING