TEC SX4T - B B/W Direct Thermal User Manual page 81

2. PRINTER SETUP
2.8 Loading the Ribbon
(Cont.)
NOTE:
Ribbon loss per ribbon saving
varies according to the relation
between the outer roll diameter
of the used ribbon and the print
speed.
Print speed Ribbon loss/Ribbon saving
3"/sec. Approx. 5 mm
5"/sec. Approx. 8 mm
8"/sec. Approx. 17 mm
T
Auto Ribbon Saving Mode
When the auto ribbon saving function is selected, it will be activated to
reduce ribbon loss when a no print area extends more than 20 mm. For
further information on this function, please ask a TOSHIBA TEC
authorised service representative.
E2-13
ENGLISH VERSION EO1-33036
2.8 Loading the Ribbon