Test Print - TEC SX4T - B B/W Direct Thermal User Manual

5. SYSTEM MODE

5.6 TEST PRINT

T
Outline of Test Print
In the Test Print mode, you can print the test pattern and set its conditions. This is useful to check the
print quality of new media or ribbon.
The Test Print menu contains the following:
[RESTART]
Auto print mode
for factory test
(Black mark sensor)
[PAUSE]
The printer feeds one media, and then
prints 5 pcs. of the Slant Line (3 dots).
[PAUSE]
The printer feeds one media, and then
prints 5 pcs. of the Bar Code.
[PAUSE]
[PAUSE]
The printer feeds one media, and then
prints 5 pcs. of the Slant Line (3 dots).
[PAUSE]
The printer feeds one media, and then
prints 5 pcs. of the Bar Code.
[PAUSE]
Regular mode
Test pattern selection
[FEED]
[RESTART]
[FEED]
[RESTART]
[FEED]
[RESTART]
[FEED]
[RESTART]
[FEED]
[RESTART]
[FEED]
[RESTART]
[FEED]
[RESTART]
[FEED]
[RESTART]
[FEED]
[RESTART]
[PAUSE]
Issue
5-42
5.6 TEST PRINT
Regular mode
Print condition setting
[PAUSE]
Use the [FEED] or [RESTART] key
to select a desired option.
[PAUSE]
Use the [FEED] or [RESTART] key
to select a desired option.
[PAUSE]
Use the [FEED] or [RESTART] key
to select a desired option.
[PAUSE]
Use the [FEED] or [RESTART] key
to select a desired option.
[PAUSE]
Use the [FEED] or [RESTART] key
to select a desired option.
[PAUSE]
Use the [FEED] or [RESTART] key
to select a desired option.
[PAUSE]
Use the [FEED] or [RESTART] key
to select a desired option.
[PAUSE]
The printer feeds one media
EO18-33012A