Covers And Panels - Toshiba SX4T - TEC B B/W Direct Thermal Owner's Manual

4. MAINTENANCE
4.1.1 Print Head/Platen/
Sensors (Cont.)
NOTE:
Please purchase the Print Head
Cleaner (P/No. 24089500013)
from your authorised TOSHIBA
TEC service representative.

4.1.2 Covers and Panels

CAUTION!
1. DO NOT POUR WATER
directly onto the printer.
2. DO NOT APPLY cleaner
or detergent directly onto
any cover or panel.
3. NEVER USE THINNER
OR OTHER VOLATILE
SOLVENT on the plastic
covers.
4. DO NOT clean the panel,
covers, or the supply
window with alcohol as it
may cause them to
discolour, loose their
shape or develop
structural weakness.
6. Clean the Print Head Element with a Print Head Cleaner or a cotton
swab or soft cloth slightly moistened with alcohol.
Print Head
Print Head
Element
Platen
7. Wipe the Platen, Feed Roller, and Pinch Roller with a soft cloth
slightly moistened with alcohol. Remove dust or foreign substances
from the internal part of the printer.
8. Wipe the Feed Gap Sensor and Black Mark Sensor with a dry soft
cloth.
Wipe the covers and panels with a dry soft cloth or a cloth slightly
moistened with mild detergent solution.
E4- 2
ENGLISH VERSION EO1-33058
Black Mark Sensor/
Feed Gap Sensor
4.1 Cleaning
Pinch Roller
Feed Roller