Toshiba SX4T - TEC B B/W Direct Thermal Owner's Manual page 74

2. PRINTER SETUP
2.12 Position and Print
Tone Fine
Adjustment (Cont.)
NOTES:
Choose a desired value by using the
[RESTART] or [FEED] key.
Pressing the [FEED] key one time
causes a –0.5mm change, up to
–9.5 mm.
Pressing the [RESTART] key one
time causes a +0.5mm change, up
to +9.5 mm.
• Example of Reverse Feed Amount Fine Adjustment
When setting +3.0 mm
Compared with "+0.0mm" position, the print start position
after a reverse feed is shifted forward.
When setting +0.0 mm
When setting –3.0 mm
Compared with "+0.0mm" position, the print start position
after a reverse feed is shifted backward.
Reverse Feed Amount Fine Adjustment
[RESTART]
[FEED]
After selecting a fine adjustment value, press the [PAUSE] key.
Feed Direction
Feed Direction
Feed Direction
E2-60
ENGLISH VERSION EO1-33058
2.12 Position and Print Tone Fine Adjustment
<3>ADJUST SET
BACK ADJ. +5.0mm
BACK ADJ.+9.5mm
BACK ADJ.+9.0 mm
BACK ADJ.+0.5mm
BACK ADJ.+0.0mm
BACK ADJ.-0.5mm
BACK ADJ.-9.0mm
BACK ADJ.-9.5mm
Print Start Position after a
reverse feed
3mm
Print Start Position after a
reverse feed
3mm
Print Start Position after a
reverse feed