Toshiba SX4T - TEC B B/W Direct Thermal Owner's Manual page 103

APPENDIX 1 MESSAGES AND LEDS
LCD Message
No.
22 SYSTEM ERROR
100BASE LAN
23
INITIALIZING...
24
RFID WRITE ERROR
25
RFID ERROR
26 INPUT PASSWORD
PASSWORD INVALID
27
Please Power OFF
NOTE: When an error message listed above appears on the LCD message display, please refer to Section 5
TROUBLESHOOTING for solution.
LED Indication
POWER ONLINE ERROR
When the following abnormal operations
are performed, a system error occurs:
(a) Command fetch from an odd address
(b) Access to word data at an odd
(c) Access to long-word data at an odd
(d) Access to the area of 80000000H to
(e) An undefined instruction in an area
(f) An undefined instruction in a delay
(g) An instruction to rewrite a delay slot
100 Base LAN Board is being
initialized.
The printer did not succeed in writing
data onto an RFID tag after having
retried for a specified times.
The printer cannot communicate with
the RFID module.
The printer is waiting for a password to
be entered.
A wrong password was entered
consecutively for three times.
EA1- 2
Printer Status
address
address
FFFFFFFFH in the logic space in
user mode.
other than a delay slot was decoded.
slot was decoded.
was decoded.
ENGLISH VERSION EO1-33058
APPENDIX 1 MESSAGES AND LEDS
Acceptance of
Restoration by
Status Request
RESTART key
Reset Command
Yes/No
No
-----
Yes
Yes
No
No
Yes/No
No
-----
Yes
Yes
No
No