Hayward Pro Logic® Installation Manual page 42

if AQL-SS-D is connected
Digital Spa Config.
+ to view/change
Select Digital Spa
A
Digital A, Button 1
Pool/Spa
Digital A, Setpoint
Heater1
Select Digital Spa
This menu only appears if more than one AQL-SS-D is detected at power up. Select which of the
available remote controls (A, B or C) is to be configured.
Digital A, Button 1
This menu allows the user to map each button of the AQL-SS-D to one of the standard Pro Logic
functions. The default selections are: Button 1 - Pool/Spa, Button 2 - Filter, Button 3 - Lights, Button
4 - Heater1, Button 5 - Valve3, Button 6 - Valve4, Button 7 - Aux1 and Button 8 - Aux2.
Digital A, Setpoint
If more than one heater is installed, select the spa heater you wish to control. If no heaters are
installed, "Heaters Disabled" will be displayed.
Remote Menus
Enabled
This feature will prevent unauthorized access to the Settings, Timers, and Configuration menus from
any of the Pro Logic's remote display/keypads. When disabled, the remote display/keypads will only
show the default menu and allow on/off control via the pushbuttons. Note that the function of the Pro
Logic's built-in display/keypad is unchanged by this selection. Once disabled, the only way to enable
"Remote Menus" is to use the local display/keypad.
All Timeclocks
7-day
This selection affects ALL of the timeclock logic in the Pro Logic. If "7-day" is selected, each
timeclock will have one set of turn-on/turn-off settings that operate every day of the week. If "Weekend/
Weekdays" option is selected then the user can enter one set of turn-on/turn-off times for the weekend
(fixed as Saturday/Sunday) and another set of turn-on/turn-off times for weekdays (Monday through
Friday).
Time Format
12 hour AM/PM
Units
ºF and PPM
Push to access the Digital Spa Side Remote options
Move to previous/next configuration menu
Rotates between all available remotes
Move to next menu item
Rotates between System Off, Pool/Spa, Filter, Lights, Heater1, Valve3,
Valve4, and all available Aux outputs
Move to previous/next menu item
Rotates between heaters that are enabled
Move to previous menu item or next configuration menu
Toggle between Enabled (default) and Disabled Remote Menus
Move to previous/next configuration menu
Toggle between 7-day (default) and Weekend/Weekday time options
Move to previous/next configuration menu
Toggle between 12 hour AM/PM (default) and 24 hour time format options
Move to previous/next configuration menu
Toggle between ºF and PPM (default) and ºC and g/L (Metric) options
Move to previous/next configuration menu
39