Hayward Pro Logic® Installation Manual page 2

IMPORTANT SAFETY INSTRUCTIONS
When using this electrical equipment, basic safety precautions should always be
followed, including the following:
READ AND FOLLOW ALL INSTRUCTIONS
•
• WARNING: Disconnect all AC power during installation.
!
• WARNING: Water in excess of 100 degrees Fahrenheit may be
!
hazardous to your health.
• WARNING: To reduce the risk of injury, do not permit children to
!
use this product unless they are closely supervised at all times.
• A green colored terminal marked "Grounding" is located inside the wiring
compartment. To reduce the risk of electric shock, this terminal must be
connected to the grounding means provided in the electric supply service
panel with a continuous copper wire equivalent in size to the circuit conductors
supplying the equipment.
• One bonding lug for US models (two for Canadian models) is provided on the
external surface. To reduce the risk of electric shock, connect the local
common bonding grid in the area of the swimming pool, spa, or hot tub to
these terminals with an insulated or bare copper conductor not smaller than 8
AWG US / 6 AWG Canada.
• All field installed metal components such as rails, ladders, drains, or other
similar hardware within 3 meters of the pool, spa or hot tub shall be bonded to
the equipment grounding bus with copper conductors not smaller than 8 AWG
US / 6 AWG Canada.
SAVE THESE INSTRUCTIONS
•