Understanding The Measurement Instructions; Measuring Voltage; Table 2-1 Numerical Steps Descriptions - Agilent Technologies U1252B User's Manual And Service Manual

2 Making Measurements

Understanding The Measurement Instructions

Measuring Voltage

WA R N I N G
24
When making measurements, follow the numerical steps
labelled in the diagrams. Refer to
description of the steps.

Table 2-1 Numerical steps descriptions

No.
Turn the rotary switch to the measurement option shown in the diagram
Connect the test leads into the input terminals shown in the diagram
Probe the test points
Read the results on the display
The U1251B and U1252B offer true- RMS readings for AC
measurements that are accurate for sine waves, square
waves, triangle waves, staircase waves, and other waveforms
without any DC offset.
For AC with DC offset, use AC + DC measurement on
or rotary switch location. Applies only to U1252B.
Ensure that the terminal connections are correct for that particular
measurement before proceeding with the measurement. To avoid
damaging the device, do not exceed the input limit.
Agilent U1251B/U1252B User's and Service Guide
Table 2- 1 below for a
Instructions