Measuring Resistance, Conductance And Testing Continuity; Figure 2-7 Measuring Resistance - Agilent Technologies U1252B User's Manual And Service Manual

2 Making Measurements

Measuring Resistance, Conductance and Testing Continuity

C A U T I O N
34
Disconnect the circuit power and discharge all high-voltage capacitors
before measuring resistance to prevent any possible damage to the
multimeter or the device under test.
Set up the multimeter to measure resistance as shown in
Figure 2- 7. Then probe the test points (by shunting the
resistor) and read the display.

Figure 2-7 Measuring resistance

Agilent U1251B/U1252B User's and Service Guide
Black Lead
Red Lead