Installing Processors; Figure 1-21. Disk Drive Installation In Slot 2; Figure 1-22. Disk Drive Installation In Slots 1 And 2 - HP rp4410 Installation Manual

Figure 1-21 Disk Drive Installation in Slot 2
Step 3. Close the drive ejector handle by pushing it down until it clicks. The hot-pluggable disk drive is now
correctly installed.
Figure 1-22 Disk Drive Installation in Slots 1 and 2

Installing Processors

This section provides information about installing processors.
WARNING Voltages are present at various locations within the server whenever an ac power
source is connected. This voltage is present even when the main power switch is in
the off position.
Chapter 1
Installing the System
Installing Additional Components
Slot 2—SCSI ID 1
Slot 1—SCSI ID 0
43