Verifying The Server Configuration Using Boot Console Handler - HP rp4410 Installation Manual

Installation guide, sixth edition - hp 9000 rp4410/rp4440
Hide thumbs Also See for rp4410:
Table of Contents

Advertisement

Installing the System
Booting the Operating System
Step 1. At the BCH
Interact with IPL (Y, N, or Cancel)?>
Step 2. To interact with IPL, answer y.
Step 3. At the
prompt, type hpux-is.
ISL>
Booting HP-UX in LVM Maintenance Mode
To boot to HP-UX in LVM maintenance mode, follow these steps:
Step 1. At the BCH
Interact with IPL (Y, N, or Cancel)?>
Step 2. To interact with IPL, answer y.
Step 3. At the
prompt, type hpux-lm.
ISL>
Shutting Down HP-UX
To shut down HP-UX running on a server, use the shutdown command. You have the following options when
shutting down HP-UX:
To shut down and reboot an HP-UX system, use the shutdown -r command.
To shut down and halt (power off) an HP-UX system, use the shutdown -h command.
For details, see the shutdown (1M) manpage and follow these steps:
Step 1. From the HP-UX command line, issue the shutdown command to shut down the HP-UX operating
system.
Step 2. Log in to HP-UX running on the server that you want to shut down.
You should log in to the iLO MP for the server and use the
console. Accessing the console through the iLO MP enables you to maintain console access to the
server after HP-UX has shut down.
Step 3. Issue the shutdown command with the appropriate command-line options.
The command-line options you specify dictate the way in which HP-UX shuts down, and whether
the server is rebooted.
Use the following list to choose an HP-UX shutdown option for the server:
To shut down HP-UX and halt (power off) the server, issue the shutdown -h command.
To reboot a halted server you must power on the server using the PC command at the iLO MP
Command
To shut down HP-UX and reboot the server, issue the shutdown -r command.

Verifying the Server Configuration Using Boot Console Handler

From the BCH
Main Menu
menu to verify the type and quantity of processors, memory, and I/O cards:
Step 1. To enter the POSSE shell, type CO from the
the shell, type help .
pr (Processors)
90
, enter command or menu> bo pri. The following message displays:
Main Menu
, enter command or menu> bo pri. The following message displays:
Main Menu
menu.
, enter in to go the
INformation Menu
Console
. Use the corresponding command from the
. To list all the categories available in
iLO MP Main Menu
menu to access the server
Chapter 1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rp44409000 rp4410-49000 rp4440-89000 rp44109000 rp4440

Table of Contents