Figure 1-15
Hot-Swappable Power Supply Fan (Unit 2)
Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD
CAUTION
safety precautions can result in damage to the server.
NOTE
A hot-swappable device does not require interaction with the operating system before the
device is removed from or installed into the server.
The ac power to the server does not need to be off to remove or replace a hot-swappable chassis
fan unit.
Removing a Hot-Swappable Fan Unit
To remove an I/O or power supply fan unit, follow these steps:
Chapter 1
Installing the System
Installing Additional Components
33