To set the region and clock
1. Use the [(]/[)]/[&]/[*] button on the Remote Commander to select "Set Region and Clock" in the
setup wizard, then press the [ENTER] button.
2. Set the region and clock items.
Select the region:
Select the display pattern:
Enter the year, month, day and time: Enter the date and time using the number buttons on the
3. Use the [(]/[)] button on the Remote Commander to select "Save", then press the [ENTER] button.
The setup wizard is restored.
To select the line interface
1. Use the [(]/[)]/[&]/[*] button on the Remote Commander to select "Select Line I/F" in the setup
wizard, then press the [ENTER] button.
2. Select the line interface to be used.
Which is your Line I/F?:
Which is your primary Line I/F?: If you select two or more interfaces with "Which is your Line I/
3. Use the [(]/[)] button on the Remote Commander to select "Save", then press the [ENTER] button.
The setup wizard is restored.
PCS-XG80
Select the country or region where the system is used.
Select the display pattern of year, month and day.
Remote Commander.
Select from among IP, ISDN and SIP.
F?", select the interface you use most often.
When you enter a Number/Address, a Dial menu that is custom-
ized to this selected Line I/F is displayed.
2-3