2-2-2. Other Setup
Other Setup described in this section does not appear in Initial Setup Wizard, but these settings are XG80
unique settings. These are explained as below.
1080i Mode
Transmission and reception of the picture in 1080i mode is available only for connection via LAN.
When 1080i mode is set to "On", a remote party's 1080i mode must be set to "On".
When 1080i mode is "On", MCU, H.239 presentation, PinP/PandP/Side by Side displays, 720P-
YPbPr input and S-video input and RGB input are not available.
To set 1080i mode, Setup → Administrator → 1080i Mode.
Off: Not to use 1080i video format.
On: To use 1080i video format.
n
When set to "On" from "Off", the system reboots automatically.
(Also when set to "Off" from "On", the system reboots automatically.)
2-6
PCS-XG80