Microphone Connection - Sony Ipela PCS-XG80 Integration Manual

1-1-3. Microphone Connection

The PCS-A1, PCSA-A3 and PCSA-A7 microphones can be connected to the input of the PCS-XG80S.
Up to two PCS-A1 microphones, up to two PCSA-A3 microphones, and up to 80 PCSA-A7 (cascaded
connection 40 + cascaded connection 40) can be connected. When you connect the microphone(s) to the
PCS-XG80S, pay careful attention to the positioning guidelines described below.
PCS-A1, PCSA-A3 microphone layout
The positioning of the PCS-A1, PCSA-A3 microphones with the PCS-XG80/XG80S is the same as with
other models in the PCS series. For details, refer to the Operating Instructions.
Two recommended audio setups (Case1 and Case2) are shown below.
Case1
Microphone
Suggested number
Input audio mode (microphone)
Output audio mode (loud speaker)
Setup menu confi guration
n
*1 "Stereo or Monaural" depends on the setting of Input Mode/Output Mode of far end point.
* Place each loud speaker at least 1.5 m from the PCS-A1.
1-10
PCS-A1 x 2
4 to 6 persons
Stereo
*1
Stereo *1
Communication:
Audio 1:
Audio 1:
Audio 1:
Audio 1:
Audio 1:
Loud
speaker
R
Loud
speaker
L
0.5 m to 1.5 m
PCS-A1 x 2
3 m or less
Audio mode MPEG4
Audio Input MIC
Input select (MIC) MIC (A1/A3)
Input Mode Stereo
Output Mode Stereo
Echo canceller On
1 m to 1.5 m
*1
*1
PCS-XG80