Remote Commander And Pairing - Sony Ipela PCS-XG80 Integration Manual

1-1-8. Remote Commander and Pairing

RF (Radio Frequency) Remote Commander
The supplied Remote Commander controls the Communication System (or its Camera Unit) by using the
radio frequency of 2.4 GHz.
The remote commander can be paired with either the Communication System or its Camera Unit, such that
this remote commander will not accidentally operate another Communication System or its Camera Unit.
The range of the remote commander is 10 m (30 ft.). Depending on the circumstances, a longer range may
be possible.
Up to fi ve RF remote commanders can be paired with one Communication System.
The oldest pairing information is overwritten when a sixth remote commander is paired.
When an additional remote commander is paired, a new commander which is a replacement for a lost or
broken one is paired, or the RF remote control reception (Communication System or Camera Unit) is
changed because, for example, it has failed, pairing must be performed. The paring procedure is as de-
scribed below.
Before the Pairing Procedure
The Remote Commander and the Communication System are paired at the factory.
If the reception conditions are diffi cult, you can change the pairing target from the Communication Sys-
tem to the Camera Unit.
(Refer to "RF Remote Control Reception" in 2-2-2.)
When you are performing pairing, turn off any other Communication Systems that may be located nearby.
If another Communication System is turned on, the Remote Commander may be paired with that Commu-
nication System (or its Camera Unit).
The remote commander can be paired with the Communication System or its Camera Unit, so that this
remote commander cannot accidentally operate another Communication System or its Camera Unit.
When you are performing the pairing procedure, aim the head of the Remote Commander at the
Communication System (or receiver on the Camera Unit). The distance between the Remote Commander
and the unit must not exceed 20 cm (8 inches).
When performing the pairing procedure
/
1-22
Within 20 cm (8 inch)
PRESENTATION
/
F1 F2 F3 F4
LAYOUT
VIDEO INPUT CAMERA
VOLUME ZOOM
T
ENTER
W
RETURN TOOLS
BACK
CONNECT SPACE DISCONNECT
1 2 3
ABC DEF
4 GHI 5 JKL 6 MNO
7 8 9
PQRS TUV WXYZ
TONE DOT
0
ON/OFF
MIC
PCS-RF1
RF
VISCA OUT TERMINAL
Within 20 cm (8 inch)
PRESENTATION
/
F1 F2 F3 F4
LAYOUT
VIDEO INPUT CAMERA
VOLUME ZOOM
T
ENTER
W
RETURN TOOLS
BACK
CONNECT SPACE DISCONNECT
1 2 3
ABC DEF
4 GHI 5 JKL 6 MNO
7 8 9
PQRS TUV WXYZ
TONE DOT
0
ON/OFF
MIC
PCS-RF1
RF
PCS-XG80