Location and function of camera parts
Front
Lens
This is a 10-magnifi cation optical zoom lens.
POWER/STANDBY indicator
TERMINAL connector
Connect to the CAMERA connector on the HD Visual Communication System.
Receiver of the RF Remote Commander
The Remote Commander and the Communication System are paired at the factory.
If the Communication System is located apart from the Remote Commander, it may not be controlled
due to the condition of reception. In this case, perform the procedure to pair the Camera Unit with the
Remote Commander. Refer to the Operating Instructions or 1-1-8 "Remote Commander and Pairing".
Operable distance of RF-Remote Commander is 10 m (30 ft.). Depending on the circumstances, a
longer operable distance may be possible.
VISCA OUT connector
This is used for VISCA connection to 2nd camera. When a second camera is connected with the HD
Visual Communication System, connect the VISCA cable from the fi rst camera with the VISCA IN of
the second camera. Please refer to "Connecting HD camera as 2nd Camera". (page 1-9)
PCS-XG80
POWER/STANDBY
Rear
VISCA OUT
TERMINAL
1-5