Speaker
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the front bezel
4.
Rotate the drive cage to its upright position.
5.
Disconnect the speaker wire from the system board (SPKR, P5).
6.
Remove the two black T15 screws that secure the speaker to the chassis.
Figure 5-50
7.
Lift the speaker from the inside of the chassis to remove it.
To install the speaker, reverse the removal procedures.
(Access Panel on page
(Front Bezel on page
Removing the speaker
(Preparation for Disassembly on page
32).
34).
32).
Speaker
71