Removing An External 3.5-Inch Drive - HP MultiSeat ms6000 Maintenance And Service Manual
Maintenance & service guide: hp multiseat 6000 desktop, hp multiseat t100 thin client
Hide thumbs
Also See for MultiSeat ms6000:
- Hardware reference manual (63 pages) ,
- Troubleshooting manual (62 pages) ,
- Manual (19 pages)
Table of Contents
Advertisement
10.
Rotate the drive cage back down to its normal position.
CAUTION:
Figure 5-26
The system automatically recognizes the drive and reconfigures the computer.
Removing an External 3.5-inch Drive
CAUTION:
computer.
The 3.5-inch drive is located underneath the 5.25-inch drive. You must remove the external 5.25-inch
drive before removing the external 3.5-inch drive.
1.
Follow the procedure in
inch drive and access the 3.5-inch drive.
CAUTION:
from the electrical outlet before proceeding.
Be careful not to pinch any cables or wires when rotating the drive cage down.
Rotating the Drive Cage Down
All removable media should be taken out of a drive before removing the drive from the
Removing an External 5.25-inch Drive on page 51
Ensure that the computer is turned off and that the power cord is disconnected
to remove the 5.25-
Installing and Removing Drives
55
Hide quick links:
Advertisement
Table of Contents
