Web Tools Functionality Moved To Dcfm - HP StorageWorks 8/8 - SAN Switch Release Note

Web Tools functionality moved to DCFM

The functionality that was moved from Web tools in 6.1.1 to DCFM applies to both DCFM Professional
and DCFM Enterprise and also applies to 6.2.x.
Table 7 Web Tools functionality in DCFM
Function
Add unzoned devices
Analyze zone config
Define device alias
Device accessibility matrix
Fabric events
Fabric summary
FCIP tunnel configuration
30
Table 7
Web Tools 6.1.0
Zone Admin
Zone Admin
Zone Admin
Zone Admin
Monitor > Fabric events
Reports > Fabric summary
Port Admin Module >
GigE tab
describes these changes.
DCFM
Configure > Zoning
Reverse Find in the zoning dialog
provides the view of the zoned
and unzoned devices in the fabric
if all zone members are selected
for Find.
Configure > Zoning:
Reverse Find in the zoning dialog
provides the view of the zoned
and unzoned devices in the fabric
if all zone members are selected
for Find.
Device Tree and Topology:
Connected End Devices: Custom
display from the top level in the
main frame provides the device
tree and topology view for all the
zoned devices if all zones are
selected in the active zone
configuration.
Configure > Zoning
Configure > Zoning
The Compare dialog provides the
Storage-Host and Host-Storage
view in a tree representation that
is comparable to the Device
Accessibility Matrix when all
devices are selected.
Monitor > Logs > Events
Monitor > Reports > Fabric
Summary report
Configure > FCIP tunnel
Comments
Viewing FCIP tun-
nels is still suppor-
ted in Web Tools
6.1.1, but New,
Edit Config, and
Delete are avail-
able only in
DCFM.