HP StorageWorks 8/8 - SAN Switch Release Note page 49

Hp storageworks fabric os 6.2.0g release notes (5697-0355, march 2010)
Hide thumbs Also See for StorageWorks 8/8 - SAN Switch:
Table of Contents

Advertisement

CP panicked with FICUD crash and rebooted during supportsave.
If ISL links between two encryption cluster nodes are continuously dis-
connected/reconnected during rekey operations, one of the LUNs can
hang at LUN discovery state.
LUNs in a container show target offline, leading to the host no longer
having access to their LUNs through the crypto target containers.
With tape pipelining active, the switch may return a good status without
sending data, leading to tape I/O failure/errors.
The host detects IFCC errors to CUP port.
HP StorageWorks Encryption SAN Switch went faulty when starting
traffic, which let to loss of LUNs to the host.
Taking SKM down while rekeys are in progress causes a LUN to get
stuck in Not ready (Key creation) state.
When attempting to swap ports from the Web Tools GUI, the operation
may fail due to an HTTP 500 error.
Default SNMP v3 values set differently in different Fabric OS releases
leading to the mibcapability option of snmpconfig not being
able to control ficon mib.
In Access Gateway mode, if the second FDISC comes in before the
switch responds to the first FDISC between the same pair of devices,
the Access Gateway panics, triggering a reboot.
Applications cannot distinguish between application blade and Core
blades using SNMP.
SNMP object swFCPortPhyState gets invalid value 11.
Web Tools reports certain devices incorrectly due to a WWN mapping
issue.
Memory usage for weblinker gets very high when DCFM is polling
LUNs.
With Virtual Fabrics, deleting a FID while in the FID leads to the user
being stuck in the FID, and all commands generating an error message.
Workaround prior to upgrade: After
enabling FMSMODE for the first time,
do
switchdisable/switchenable
- hafailover - hareboot -
reboot.
Fixed in Fabric OS 6.2.0d
Fixed in Fabric OS 6.2.0d
Fixed in Fabric OS 6.2.0d
Fixed in Fabric OS 6.2.0d
Fixed in Fabric OS 6.2.0d
Fixed in Fabric OS 6.2.0d
Fixed in Fabric OS 6.2.0d
Fixed in Fabric OS 6.2.0d
Fixed in Fabric OS 6.2.0d
Fixed in Fabric OS 6.2.0d
Two new FRU classes have been
created in Fabric OS 6.2.0d
(coreblade and
applicationblade).
Two more values for SNMP port
status: validating (10) [module
is being validated] and
invalidModule (11) [module is
invalid] have been added to Fabric
OS 6.2.0d
Fixed in Fabric OS 6.2.0d
Fixed in Fabric OS 6.2.0d
Fixed in Fabric OS 6.2.0d
HP StorageWorks Fabric OS 6.2.0g release notes
49

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents