Video Loss Screen; Figure 3-66 Motion Detection Actions 2 Screen - Honeywell HRXDS16D1T User Manual

Configuration
5.
6.
7.

Video Loss Screen

1.
Document 800-04559 Rev D
11/09
Note For the Notify action, the notify item you select should be
enabled in the Notification setup screen and the DVR should be
registered in the RAS (Remote Administration System).
Figure 3-66
Highlight the desired box under the PTZ heading, then press #. A list of PTZ
presets appear. Select the preset position for each PTZ camera, where you want
PTZ cameras to move to whenever the DVR detects motion on the selected
camera's input.
Highlight the desired box under the Spot Monitor column, then press #. A list of
SPOT monitors and cameras appears. Each SPOT monitor can be associated
with a camera. The DVR will display the associated camera on the SPOT monitor
whenever it detects motions on the selected camera.
To save your Motion Detection changes, highlight Save, then press #.
Select Cancel to exit the screen without saving the changes.
In the Event menu (see
Video Loss setup screen appears (see
Motion Detection Actions 2 Screen
3-54) highlight Video Loss, then press #. The
Figure
Figure 3-67).
91