Event Status Screen; Figure 3-78 Event Status Screen - Honeywell HRXDS16D1T User Manual

Configuration
9.

Event Status Screen

1.
2.
Document 800-04559 Rev D
11/09
To save your System Event changes, highlight Save, then press #.
Select Cancel to exit the screen without saving the changes.
In the Event menu (see
Event Status screen appears.
Figure 3-78
The Event Status screen displays the status of the DVR's systems and inputs.
Events will be highlighted, and related channels or events will flicker for five
seconds when detected.
Event status
Alarm-In, Motion,
Video Loss,
Text-In
Check Alarm-In,
Check Recording
Panic Record
Disk Almost Full
Highlight the Storage tab to display the hard disk drive status. See
Screen section for more details.
3-54), highlight Event Status, then press #. The
Figure
Event Status Screen
Is highlighted ...
When each event is detected based on the settings you
made in the Alarm-In, Motion Detection and Text-In setup
screen on the Event menu.
When each event is detected based on the settings you
made in the System Event setup screen on the Event menu.
While the DVR is in the panic recording mode.
When the DVR is not in the Recycle mode and the level of
disk usage reaches the Disk Almost Full percentage you
made in the System Event setup screen on the Event menu.
Disk Full will be highlighted when the DVR is not in the
Recycle mode and all available storage space has been
used.
Storage
101