Honeywell HRXDS16D1T User Manual page 68

3.
PTZ Camera Setup
1.
68
Note When you select Covert 1, the DVR displays the camera title and
status icons on the covert video. When you select Covert 2, the
DVR displays only the camera title on the covert video.
Note A user who does not have Covert Camera View authority cannot
view video from cameras set to Covert 1 or Covert 2 in both the
live monitoring and playback modes.
Highlight the box in the Resolution column and select the recorded image
resolution from Standard, High and Very High.
Note When you select Very High, that resolution is applied to all the
cameras within the same camera group. The DVR has two
camera groups (No. 1: cameras 1 to 8 and No. 2: cameras 9 to
16 for the 16-channel model, and No. 1: cameras 1 to 4 and No.
2: cameras 5 to 8 for the 8-channel model).
The maximum recording speed for all cameras in each camera group will be
limited to:
120 ips when set to Standard resolution
60 ips when set to High resolution
30 ips when set to Very High resolution
When set to High resolution for all cameras within the same camera group, the
DVR records video from each camera as fast as possible according to the preset
recording speed within the total ips of each camera group. When the total ips are
higher than the maximum recording speed of the camera group, the ips of each
camera might decrease so as not to exceed the maximum recording speed.
On the Camera setup screen (see
setup screen displays.
HRXDS Series DVR User Guide
Figure 3-35), highlight the PTZ tab. The PTZ