Figure 3-16 Device Information Screen - Honeywell HRXDS16D1T User Manual

3.
4.
The Information column displays whether the device is being used (In Use) or not.
Other indicates the device has been used for another DVR.
Viewing Storage Device Information
1.
2.
3.
52
If you select Not Using from the Use As drop-down list, then highlight Format, the
device will not be used for either recording or archiving.
To partition the device, highlight Partition - CD/DVD Burn, then press # to toggle
between On and Off.
When set to On, you can save video clips on a CD-RW or DVD RW and print
images on a non-PostScript printer while in the Search mode.
Note A USB hard disk drive can be formatted and used only
for archiving.
The DVR does NOT support USB hard disk drives with a
version lower than 2.0.
System upgrades require formatting internal hard disk
drives, so do not uninstall internal hard disk drives even
though they are not used for either recording or
archiving.
Highlight the box in the Information column for the desired storage device, then
press #. You will be able to check the time information about recorded data.
Figure 3-16
To erase recorded data on the selected device, highlight Clear, then press #. You
will be prompted to confirm that you want to delete the data.
To use a USB hard disk drive, highlight Use, then press # after connecting the
device.
Highlight Don't Use, then press # if you want to stop using the device.
Note When disconnecting a USB hard disk drive from the DVR,
highlight Don't Use first and then disconnect the device.
Device Information Screen
HRXDS Series DVR User Guide