Connecting The Video Input; Connecting The Loop-Through Video; Figure 2-2 Video Input Connectors; Figure 2-3 Video Loop-Through Connectors - Honeywell HRXDS16D1T User Manual

Installation

Connecting the Video Input

Connect the coaxial cable from the video source to the BNC Video In connectors.

Connecting the Loop-Through Video

If you would like to connect your video source to another device, you can use the Loop
BNC connectors.
Document 800-04559 Rev D
11/09
Figure 2-2 Video Input Connectors
Figure 2-3 Video Loop-Through Connectors
Note The Loop BNC connectors are auto terminated. Do NOT connect
a cable to the Loop BNC unless it is connected to a terminated
device because it will cause poor quality video.
27