Replacing the light bulb
Warning! Danger of electrical shock! Before replacing the light bulb
switch appliance off and remove the mains plug, or switch off or turn
out the circuit breaker or fuse.
Light bulb specifications: 220-240 V, max. 15 W, socket: E 14
1. To switch the appliance off press
and hold the ON/OFF button for
about 2 seconds.
2. Remove mains plug.
3. Replace defective light bulb. The
lamp is situated beneath the
operating panel and when the
door is opened it becomes acces-
sible from the bottom.
Noises during Operation
The following noises are characteristic of refrigeration appliances:
Whenever the compressor switches on or off, a click can be heard.
As soon as the compressor is in operation, you can hear it humming.
When refrigerant flows into thin tubes, you can hear bubbling or
splashing noises. Even after the compressor has been switched off,
this noise can be heard for a short time.
The ventilator generates air flow whereby noise can be emitted.