Door Alignment - AEG ARCTIS No-frost (frost free) Operating Instructions Manual

10. Reposition door handle and hole
plug-pins as shown in the dia-
gram.
11. Replace base cover.

Door Alignment

If necessary, the appliance door can be aligned.
0
1. First remove the door (see section: "Reversing the Door").
2. Remove slider for door closer B1 (B2 for door hinged on the left).
3. Using a small screw-driver, lift out the eccentric bearing bushes as
required, above and below the door, rotate and then press in according
to the figures.
The diagram only shows a right opening door.
For left opening doors please proceed accordingly at the left of the
door at top and/or bottom.
4. Reposition slider for door closer B1 (B2 for door hinged on the left).
5. Replace the door (see section: "Reversing the Door")
15