Replacing The Light Bulb - AEG ARCTIS A75238-GA Operating Instructions Manual

What to do if ...
Malfunction
Only temperatures above
0 °C can be set, although
the appliance should be
used as a freezing unit.
Only temperatures below
0 °C can be set, although
the appliance should be
used as a cooling unit.

Replacing the light bulb

1
Warning! Danger of electrical shock! Before replacing the light bulb
switch appliance off and remove the mains plug, or switch off or
disconnect from the electricity supply.
Light bulb specifications: 220-240 V, max. 25 W, socket: E 14
0
1. To switch the appliance off press
and hold the ON/OFF button for
approximately 1 second.
2. Remove mains plug.
3. For replacement of the light bulb
press the cover and remove it like
shown on the illustration.
4. Replace defective light bulb.
5. Place the cover again.
32
Possible cause
The appliance is in the
operation mode "Cooling".
The appliance is in the
operation mode "Freezing".
Remedy
Selecting the operation
mode "Freezing". For that,
please refer in the "Select
Freezing or Cooling"
chapter.
Select the operation mode
"Cooling". For that, please
refer in the chapter "Select
Freezing or Cooling".
818 22 92-00/6