Door Alignment - AEG ARCTIS Operating Instructions Manual

7. Place washer (B) between door
and door pivot at bottom left,
and turn pivot pin (A) into lower
door pivot at the left.
8. Reposition door handle and hole
plug-pins as shown in the dia-
gram.
9. Replace base cover.

Door Alignment

If necessary, the appliance door can be aligned.
0
1. First remove the door (see section: "Reversing the Door").
2. Pry out the eccentric pivot bushings at the top and/or at the bottom of
the door as needed with a small screw driver, turn as shown in the dia-
gram and press back into place.
The diagram only shows a right opening door.
For left opening doors please proceed accordingly at the left of the
door at top and/or bottom.
3. Replace the door (see section: "Reversing the Door")
15