Table - Toshiba PSA10C-035WM Maintenance Manual

2 Troubleshooting Procedures
Table 2-5 Printer port LED resume mode error status (3/4)
LED status
25h Recovery of each device(3)
Turns the disabled HDD motor off.
26h
Waiting for completion of KBC initializing
Recovery of USB register
Recovery of CPU register
Processing of SIO dummy-reading
Resetting NDP interruption
Recovery of system, status, command and
port
Wakeup check
Initializing HW just before booting or
waiting for the completion
2-36
Test item
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
2.4 System Board Troubleshooting
Contents
Recovery of COM register
Recovery of DMAC register
PnP Resume processing 2
(not in ACPI mode)
(not in ACPI mode)
Notifies the device change status to the high
rank.
Setting WAKEUP status data for ACPI
Notifies the DVI connection status to VGA BIOS
Setting battery saving mode
Setting date
Waiting for the completion of Bluetooth
initializing (models supporting Bluetooth)
Renewal of Wakeup factor of DMI and SM-
BIOS structure table
Closing PCI device configuration area
Cache control
Renewal of parameter block A
Process related to CPU
Setting of CPU to SETUP designation
Waiting for motor-off of disabled HDD
Final decision of USB FDD information
After process of PRE_BOOT_SETUP
Clears PWRBTN_STS.
Enables Power Button.
Measures against USB failure at high
temperature