Lcd Unit/Fl Inverter - Toshiba PSA10C-035WM Maintenance Manual

4 Replacement Procedures

4.16 LCD Unit/FL Inverter

NOTE: The same part is used for the display hinge that holds the LCD unit, regardless
of the LCD size.
Removing the LCD Unit/FL Inverter
The following describes the procedure for removing the LCD unit and FL inverter (See
Figure 4-34 to 4-36).
1. Peel off two mask tapes from the front and remove the following screws.
• M2.5x8
2. Insert your fingers between the upper edge of the display mask and the LCD and
remove the display mask while unlatching the display mask.
4-50
THIN BIND screw
Figure 4-34 Removing Display Mask
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
4.16 LCD Unit/FL Inverter
x2
Mask tape
THIN BIND M2.5 6B
×