Replacing The 15.0 Inch Sxga+ Sharp Fluorescent Lamp - Toshiba PSA10C-035WM Maintenance Manual

4.18 Fluorescent Lamp
4
4.18.12

Replacing the 15.0 Inch SXGA+ Sharp Fluorescent Lamp

CAUTION: When you replace the fluorescent lamp, wear finger covers or gloves to avoid
contaminating or damaging the LCD module. Be careful not to let dust or other foreign
substances into the LCD module.
Disassembling the 15.0-inch SXGA+ Sharp Fluorescent Lamp
To disassemble the 15.0 inch SXGA+ Sharp fluorescent lamp, follow the steps below and
refer to Figures 4-153 to 4-162.
1. Turn the LCD module face down, and remove the protection cover S (A), protection
cover G (B), fixing tape (C) and fixing tape for lead wire (C).
NOTE: 1) Be careful not to damage the TCP or chips.
2) Discard the tapes removed. Do not reuse them.
Figure 4-153 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (1)
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
(A) Protection cover S
(C) Fixing tape
(C) Fixing tape for lead wire
4 Replacement Procedures
(B) Protection cover (G)
4-145