4.8 Keyboard
3. Remove the following screws holding the keyboard.
• M2.5×2.8 THIN BIND screw
4. Remove the following screw fixing the keyboard hold plate and remove the keyboard
hold plate.
• M2.5×2.8 THIN BIND screw
5. Lift the upper side of the keyboard out and turn it face down on the palm rest.
M2.5×2.8 THIN BIND
Keyboard Hold Plate
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
Figure 4-20 Removing Keyboard Hold Plate
4 Replacement Procedures
x2
x1
M2.5×2.8 THIN BIND
4-29