Toshiba PSA10C-035WM Maintenance Manual page 332

4.18 Fluorescent Lamp
8. Install the bezel (E) on the lamp cover and hook the four latches on the lamp cover
and two latches on the P-chassis.
(E) Bezel
(2) Lean the bezel on the lamp cover
without interference with the TCP.
Figure 4-126 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (20)
Figure 4-127 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (21)
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
(1) Hitch the hook of the bezel
on the rib of the P-chassis.
Make sure of mating of the bezel and the rib of the P-chassis.
Make sure of mating of the bezel and the latch of
the P-chassis.
Make sure of mating of the bezel
and the latch of the P-chassis.
4 Replacement Procedures
< Side view >
Hook
(Lamp cover side)
4-125