Toshiba PSA10C-035WM Maintenance Manual page 354

4.18 Fluorescent Lamp
4. Turn the LCD module face down. Remove four screws fixing the board and remove
the FPC (G). Open the bent portion of the TCP of the board and remove the backlight.
Screw
Figure 4-156 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (4)
Do not hold the edge.
Figure 4-157 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (5)
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
Screw loosening torque: 0.9kg•cm
Open the cap of the connector and
remove the FPC.
Raise the board and make this condition.
4 Replacement Procedures
(G) FPC
Do not hold the edge.
Screw
Screw
Screw
4-147