Toshiba PSA10C-035WM Maintenance Manual page 194

3.27 SETUP
NOTE:
1. Do not remove the AC adaptor and battery pack at the same time when
you use this feature. If you do so, data saved by the resume function
will be lost. You must also reset this option.
2. If you have set a password and the computer boots by the Auto Power
On function and Resume is on, the computer will start with the instant
security function enabled. The password = message is not displayed;
however, you must enter the password to use the computer.
3. This option is enabled only once, the setting is reset, after booting up.
(f) Panel Power On/Off
This option is displayed in the resume mode.
Enabled
Disabled
8. Configuration
This option lets you set the device configuration.
All Devices
Setup by OS
NOTE: When using installed OS, selecting "Set by OS" is recommended.
But, when setting "PC CARD-Controller Mode" to other than " Auto-
Selected", select " All Devices".
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
Enables the Panel Power On/Off.
Disables the Panel Power On/Off. (Default)
BIOS sets all devices.
Operating system sets devices that it can control.
(Default)
3 and Diagnostics
3-79