Toshiba PSA10C-035WM Maintenance Manual page 58

2.3 Power Supply Troubleshooting
DC IN icon
Lights green
Blinks orange
Doesn't light
*1 When the power supply controller detects a malfunction, the DC IN icon blinks
orange. It shows an error code.
When the icon is blinking, perform the following procedure.
1. Remove the battery pack and the AC adapter.
2. Re-attach the battery pack and the AC adapter.
If the icon is still blinking after the operation above, check the followings:
Check 1 If the DC IN icon blinks orange, go to Procedure 2.
Check 2 If the DC IN icon does not light, go to Procedure 3.
Check 3 If the battery icon does not light orange or green, go to Procedure 4.
NOTE: Use the supplied AC adapter (G71C0002T210 or G71C0002S210).
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
Table 2-2 DC IN icon
DC power is being supplied from the AC adapter.
Power supply malfunction
Any condition other than those above.
2 Troubleshooting Procedures
Power supply status
*1
2-7