Toshiba PSA10C-035WM Maintenance Manual page 227

4.6 Mini PCI Card
3. Remove the glass tape and disconnect two wireless LAN cables from JP1 and JP2 on
the mini PCI card.
4. Open the left and right latches holding the mini PCI card and remove the mini PCI
card.
Mini PCI Card
Installing the Mini PCI Card
The following describes the procedure for installing a mini PCI card (See Figure 4-10, 4-11).
The explanation in this section uses a model with wireless LAN as an example.
1. Insert the mini PCI card terminals at 45-degree slant into the connector on the
computer and press the mini PCI card from the top to secure.
2. Connect the white and black wireless LAN cables to the J1 and J2 terminals
respectively on the mini PCI card. Then stick the glass tape on the cables.
3. Attach the mini PCI slot cover and secure it with the following screw.
• M2.5x4
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
Latches
Figure 4-11 Removing Mini PCI Card
BIND or OSG
4 Replacement Procedures
Wireless LAN Antenna Cable
The position for connecting the wireless
LAN cable (White, Black) is different
from each model.
x1
4-21