Imp Entry Settings; Dhcp Snooping Entries - D-Link DGS-3200-16 - Switch - Stackable User Manual

xStack

IMP Entry Settings

This table is used to create static IP-MAC-binding port entries and view all IMP entries on the Switch. Click Find to search for an
entry. Click View All for the table to display all entries and click Delete All to remove all static entries.
To view the following window, click Security > IP-MAC-Port Binding > IMP Entry Settings:
The following fields can be set or modified:
Parameter
IP Address
MAC Address
Mode
Ports
Click Apply to implement changes. Click Find to search for an entry. Click Show All for the table to display all entries or Delete
All to remove all the static entries.

DHCP Snooping Entries

This table is used to view dynamic entries on specific ports. To view particular port settings, enter the port number and click Find.
To view all entries click View All, and to delete an entry, click Clear.
To view the following window, click Security > IP-MAC-Port Binding > DHCP Snooping Entries:
The following fields can be set or modified:
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 5 - 6. IMP Entry Settings window
Description
Enter the IP address to bind to the MAC address set below.
Enter the MAC address to bind to the IP Address set above.
Static or Auto will be displayed in this column.
Specify the switch ports for which to configure this IP-MAC binding entry (IP Address + MAC
Address). Click the All check box to configure this entry for all ports on the Switch.
Figure 5 - 7. DHCP Snooping Entries window
101