Jwac User Settings; Jwac Customize Page Language - D-Link DGS-3200-16 - Switch - Stackable User Manual

xStack

JWAC User Settings

Users can configure JWAC user settings for the Switch.
To view the following window, click Security > JWAC > JWAC User Settings:
To set the User Account settings for the JWAC by the Switch, complete the following fields and then click the Add button. To
clear the current JWAC user settings in the table at the bottom of the window, click the Delete All button.
Parameter
User Name
New Password
Confirm Password
VID(1-4094)
Click Apply to implement changes made.

JWAC Customize Page Language

Users can configure JWAC page and language settings for the Switch. The current firmware supports either English or Japanese.
To view the following window, click Security > JWAC > JWAC Customize Page Language:
To set the language used on the JWAC page, click the radio button for either English or Japanese. Click the Apply button.
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 5 - 51. JWAC User Settings window
Description
Enter a username of up to 15 alphanumeric characters.
Enter the password the administrator has chosen for the selected user. This field is case-
sensitive and must be a complete alphanumeric string.
Retype the password entered in the previous field.
Enter a VLAN ID number between 1 and 4094.
Figure 5 - 52. JWAC Customize Page Language window
142