D-Link DGS-3200-16 - Switch - Stackable User Manual page 195

xStack
Parameter
Port
Time Interval
Record Number
64
65-127
128-255
256-511
512-1023
1024-1518
Show/Hide
Clear
View Table
View Graphic
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Description
Use the drop-down menu to choose the port that will display statistics.
Select the desired set ting between 1s and 60s, where "s" stands for seconds. The default
value is one second.
Selec t number of times the Switch will be polled between 20 and 200. The default value is
200.
The total number of packets (including bad packet
(excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were betwe
127 octets in length inclusive (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were betwe
255 octets in length inclusive (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were betwe
511 octets in length inclusive (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were between
1023 octets in length inclusive (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were between
1518 octets in length inclusive (excluding framing bits but including FCS octets).
Check whether or not to display 64, 65-127, 128-255, 256-511, 512-1023, and 1024-1518
packets received.
Clicking this button clears all statistics counters on this window.
Clicking this button instructs the Switch to display a table rather than a line graph.
Clicking this button instructs the Switch to display a line graph rather than a table.
s) received that were 64 octets in length
182
en 65 and
en 128 and
en 256 and
512 and
1024 and