D-Link DGS-3200-16 - Switch - Stackable User Manual page 206

xStack
This window displays the Authenticator State for individual ports on a selected device. A polling interval between 1 and 60
seconds can be set using the drop-down menu at the top of the window and clicking OK.
The information on this window is described as follows:
Parameter Description
The Authenticator PAE State value can be: Initialize, Disconnected, Connecting, Authenticating,
Auth PAE State
Authenticated, Aborting, Held, Force_Auth, Force_Unauth, or N/A. N/A (Not Available) indicates
that the port's authenticator capability is disabled.
Backend State The Backend Authentication State can be Request, Response, Success, Fail, Timeout, Idle,
Initialize, or N/A. N/A (Not Available) indicates that the port's authenticator capability is disabled.
Port Status Controlled Port Status can be Authorized, Unauthorized, or N/A.
MAC Address The MAC Address of the device of the corresponding index number.
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 7 - 18. Authenticator State window – MAC-Based 802.1X
193