Table of Contents
Advertisement
To Establish Password
1.
Choose the Set Password option from the CMOS Setup Utility main menu and
press <Enter>.
2.
When you see "Enter Password", enter the desired password and press
<Enter>.
3.
At the "Confirm Password" prompt, retype the desired password, then press
<Enter>.
4.
Select Save to CMOS and EXIT, type <Y>, then <Enter>.
To Change Password
1.
Choose the Set Password option from the CMOS Setup Utility main menu and
press <Enter>.
2.
When you see "Enter Password", enter the existing password and press
<Enter>.
3.
You will see "Confirm Password". Type it again, and press <Enter>.
4.
Select Set Password again, and at the "Enter Password" prompt, enter the new
password and press <Enter>.
5.
At the "Confirm Password" prompt, retype the new password, and press
<Enter>.
6.
Select Save to CMOS and EXIT, type <Y>, then <Enter>.
To Disable Password
1.
Choose the Set Password option from the CMOS Setup Utility main menu and
press <Enter>.
2.
When you see "Enter Password", enter the existing password and press
<Enter>.
3.
You will see "Confirm Password". Type it again, and press <Enter>.
4.
Select Set Password again, and at the "Enter Password" prompt, please don't
enter anything; just press <Enter>.
5.
At the"Confirm Password" prompt, again, don't type in anything; just press
<Enter>.
6.
Select Save to CMOS and EXIT, type <Y>, then <Enter>.
51
AIMB-210 User Manual
Advertisement
Table of Contents
